Power MOSFET IGBT Gate Drive Optocouplers

Niveau: Supérieur, Doctorat, Bac+8Power MOSFET/IGBT Gate Drive Optocouplers Technical Data HCPL-3100 HCPL-3101 Features • High Output Current IO1 and IO2 (0.4 A Peak, 0.1 A Continuous) • 1.5 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 600 V • Wide Operating VCC Range (15 to 30 Volts) • High Speed 1 µs Typical Propagation Delay (HCPL-3100) 0.3 µs Typical Propagation Delay (HCPL-3101) • Recognized under UL 1577 for Dielectric Withstand Proof Test Voltages of 5000 Vac, 1 Minute Applications • Isolated MOSFET/IGBT Gate Drive • AC and DC Motor Drives • General Purpose Industrial Inverters • Uninterruptable Power Supply Description The HCPL-3100/3101 consists of an LED* optically coupled to an integrated circuit with a power output stage. These optocouplers are suited for driving power MOSFETs and IGBTs used in motor control inverter applica- tions. The high operating voltage range of the output stage provides the voltage drives required by gate controlled devices. The voltage and current supplied by these optocouplers allow for direct interfacing to the power device without the need for an intermediate amplifier stage. The HCPL-3100 switches a 3000 pF load in 2 µs and the HCPL- 3101, using a higher speed LED, switches a 3000 pF load in 0.5 µs. With a CMR rating of 5 kV/µs typical these optocouplers readily reject transients found in inverter applications.output high vo2h over recommended hcpl switching threshold input current power supply