These versatile, high-precision, biaxial tiltmeters are well suited for a wide variety of measurement

zTulip 4-20mA Uniaxial Clinometer Tulip 4-20mA Uniaxial Clinometers are compact and accurate instruments for measuring angular position where space is limited. Use them in pressure housings, well logging tools or on any machine or structure. Tulip’s electrolytic tilt sensor has no mechanical moving parts to break or wear out, and it’s gravity referenced. You can install your clinometer anywhere, without the need for complicated levers or fixtures. Tulip is current loop powered, so measurements can be made over long cable lengths using an economical 2-wire pair. Vertical and horizontal versions are both available, and the horizontal version measures either longitudinal or transverse rotation (see drawing) to give you maximum flexibility when designing it into your system. As an added bonus, Tulip measures temperature using a built-in thermistor. Call us today for details about this versatile device! High-Gain Version Standard Version Wide-Angle Version ANGULAR RANGE ±10 degrees (20 degree span) ±25 degrees (50 degree span) ±50 degrees* (100 deg. span) SCALE FACTOR 1.25 °/ mA typical 3.125 °/ mA typical 6.25 °/ mA typical LINEARITY 1% of full span 1% of half span, 2.5% of full span 1.2% of half span, 7.5% of full span RESOLUTION 0.005 degree 0.01 degree 0.02 degree REPEATABILITY 0.01 degree. 0.02 degree < 0.04 degree HYSTERESIS < 0.02 degree < 0.02 degree TILT OUTPUT 4-20 mA two-wire current loop -t/T TIME CONSTANT, T 150 ...