Tutorial

The following is a brief “tutorial” on the uniquebenefits and features of the LabView-based softwareused in the Fuel Cell Technologies Testing System.The presentation lasts approximately 17 minutes and isintended to demonstrate the ease-of-use, flexibility,and functionality of the software and how it can benefitthe researcher for a wide range of fuel cell testing applicationsStation #1 Control PanelMost competitive units have only 2 mass flow controllersfor the Anode and CathodeThe FCT system provides up to 4 controllersfor mixing ReformateAnode Flow Controller:to set Anode flow parameters: Blue = Stoich flowYellow = flow setpointGreen = flow readingAir Flow Controller:to set Air Bleed flow parametersBlue = Stoich flowYellow = flow setpointGreen = flow readingCO Flow Controller:to set CO flow parametersBlue = Stoich flowYellow = flow setpointGreen = flow readingCathode Flow Controller:to set cathode flow parametersBlue = Stoich flowYellow = flow setpointGreen = flow readingAnode Humidity Temperature Controller:to set Anode Humidity Temperature (Degrees C)Yellow = Temperature setpointGreen = Temperature readingCathode Humidity Temperature Controller:to set Cathode Humidity Temperature (Degrees C)Yellow = Temperature setpointGreen = Temperature readingCell Temperature Controller:to set Cell Temperature (Degrees C)Yellow = Temperature setpointGreen = Temperature readingCell Voltage ReadingCell CurrentReadingAnode Back ...