This tutorial will introduce the basic operations available with the EAGLE (Easily Applicable Graphical

EAGLE Introduction Tutorial By Aaron Westerman This tutorial will introduce the basic operations available with the EAGLE (Easily Applicable Graphical Layout Editor) PCB software. This tutorial is based on EAGLE Lite version 5.10.0 for Windows. The latest version is available at http://www.cadsoft.de/download.htm Once you have the latest version of the EAGLE software downloaded & installed, launch the program to create your new project: For this tutorial, the project will be named “EAGLE Tutorial-Dual LED blinky thing”. The next step is to create a schematic in the new project, by default the new project is already open, if adding additional schematics, be sure that the proper project is open before adding new schematics from the File Menu (File—New—Schematic): The schematic editor window will open, this is where the circuit schematic will be entered. Parts can be added to the schematic by either using the Edit Menu (Edit—Add …) or by using the Add button as shown in the following screenshots: Created October 19, 2010 Page 1 of 9 EAGLE Introduction Tutorial By Aaron Westerman Once the ADD selection box is visible, add the DUOLED-RG-A dual color, common anode LED by selecting it and then placing it in the schematic (led==DUOLED-RG-A): Continue to add: 2 – 2N3904 transistors (transistor==2N3904) – T1, T2 on schematic 2 – 10µF capacitors (rcl==CPOL-US==CPOL-USE2-5) – C1, C2 on schematic Based on Mouser P/N 647-UKW1J100MDD ...