Alibre Design Tutorial - Simple Revolve

Alibre Design Tutorial - Simple RevolveTranslucent Glass Lamp GlobePart TutorialExercise 2: Globe-1In this Exercise, We will set System Parameters first.Then, in sketch mode, we will first Outline the Bowl with Arcs & Straight Lines.Then we will use the Revolve Feature to create the Bowl.Launch Alibre Design. From the Home window - select File, Work Offline.1Open a New Part workspace. From the Home window - select File, New, Part.Maximise the Part Workspace Window.Set Design Properties.Select File, Properties.2A) Select the Tab Marked "General"- In Description: insert the information: 'Translucent Glass Lamp Globe'.- In Curve Smoothness, Select the Radio Button marked 'Automatic'.B) Select the Tab Marked "Units"- Check off the Box 'Show Units for Dimensions'.- On 'Display Units' - confirm Unit: Inches, Format: Decimals and Precision: 4.Adjust if not.- On 'Angle' - Confirm Angle: Degrees and Precision: 4.Adjust to these parameters if not.3- On 'Spinner Increment' - for 'Length:' enter .0500 " and for 'Angle:' enter 0.5000degrees. Adjust to these parameters if not. Press 'Tab' to move after editing them.C) Select the Tab marked 'Physical"- Change 'Accuracy:' to Low.- Click on the 'Calculate' Button. Notice the results.4D) Select the Tab marked "Apply Options"- On 'Apply Changes to' - Click the Radio Button beside 'The Current Document'- Click "Apply', then Click Close.Set Part Options.From Top Text Menu - Select - Tools > Options: ...