Soldering Tutorial.cdr

Electronic Kit Soldering TutorialIntroduction Ÿ Tighten the tip of the soldering iron while it is cold. The tip is Safetyeither threaded or has a retaining screw depending on your To assemble any electronic kit, you just need a few basic tools. This Ÿ Work in an area with good ventilation. When solder melts, the model of iron.simple tutorial contains all of the information you need to start rosin core produces fumes. Avoid breathing the fumes.soldering. There are also hundreds of other soldering tutorials on Ÿ Let the soldering iron get hot. A warm iron will not work.Ÿ Wash your hands after soldering. The lead in solder is the web, many with video. Ÿ “Tin” the tip. When the iron is hot, coat the tip with solder then poisonous and you should not ingest it.clean it off on a damp sponge. The tip should be shiny.Ÿ Soldering irons get very hot! The tip can be as much as 400° F. Required Tools Do not touch the metal parts of the iron. Avoid accidentally touching the soldering iron to anything. Be especially careful not Ÿ Soldering Iron: You will need an iron designed for electronics, Solderingto touch the iron to its power cord.not plumbing. It should be 30-40 watts and have a fine, pencil-Ÿ Bend the leads of the component if necessary. Resistors and like tip. diodes have the leads pointing straight out and need to be bent Ÿ Damp Sponge: This is for cleaning the tip of your iron. Most over into a U-shape. Troubleshootingsoldering stations ...