Fundamental Analysis
10
pages
English
Documents
Le téléchargement nécessite un accès à la bibliothèque YouScribe Tout savoir sur nos offres
10
pages
English
Documents
Le téléchargement nécessite un accès à la bibliothèque YouScribe Tout savoir sur nos offres
Publié par
Langue
English
- exposé
- 1.5675 impact u.k.
- international banks forecasts usd
- exact time of the economic data release
- blue-chip index smi
- international center cointrin
- 77.79 usd impact u.s.
- 0.9280 impact
- 107.2 points from 106.6 points
Publié par
Langue
English
htt ://davinci.ke
Lesson
Alineis a straight, continuous arrangement of infinitely many points. It has infinite length, but no thickness. It extends forever in two directions. You name a line by giving the letter names of any two points on the line and by placing the line symbol above the letters, for example,.
Alanehas length and width, but no thickness. It is like a flat surface that extends infinitely along its length and width. You represent a plane with a fou -sided figure, like a tilted piece of paper, drawn in perspective. Of course, this actually illustrates only part of a plane. You name a plane with a script capital letter, such as .
B
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
9/12/2008
Pa e 1 of 10
28
L E S S O N 1.1
Building Blocks of Geometry
CHAPTER 1 Introducing Geometry
P
Nature’s Great Book is written in mathematical symbols. GALILEO GALILEI
T hree building blocks of geometry are points, lines, and planes. Apointis the most asic building block of geometry. It has no size. It has only location. You represent a oint with a dot, and you name it with a capital letter. The point shown below is called .
© 2008 Key Curriculum Press
Lesson
htt
Keep a definition list in you notebook, and each time you encounter new geometry vocabulary, add the term to your list. Illustrate each definition with a simple sketch.
© 2008 Key Curriculum Press
://davinci.ke
ress.com/Ke
Pa
e 2 of 10
It can be difficult to explain what points, lines, and planes are even though you may recognize them. Early mathematicians tried to define these terms.
The ancient Greeks said, “A point is that which has no part. A line is breadthless length.” The Mohist philosophers of ancient China said, “The line is divided into arts, and that part which has no remaining part is a point.” Those definitions don’t help much, do they?
Adefinitiona word or ais a statement that clarifies or explains the meaning of hrase. However, it is impossible to define point, line, and plane without using words or phrases that themselves need definition. So these terms remain undefined. Yet, they are the basis for all of geometry.
Using the undefined termspoint, line,andplane,you can define all other geometry terms and geometric figures. Many are defined in this book, and others will be defined by you and your classmates.
Here are your first definitions. Begin your list and draw sketches for all definitions. Collinearmeans on the same line.
Co lanarmeans on the same plane.
LESSON 1.1 Building Blocks of Geometry
PressPortalV2.0/Viewer/Lesson.htm
29
9/12/2008
30
CHAPTER 1 Introducing Geometry
You can write line segmentB,using a segment symbol, asBoBA.aerehTer two ways to write the length of a segment. You can writeB=2 in., meaning the distance fromtois 2 inches. You can also use anmfor “measure” in front of the segment name, and write the distance asmAB=2If no measurement in. units are used for the length of a segment, it is understood that the choice of units is not important or is based on the length of the smallest square in the grid.
Amentline se consists of two points called theend ointsof the segment and all the points between them that are collinear with the two points.
Lesson
htt ://davinci.ke
© 2008 Key Curriculum Press
Pa e 3 of 10
9/12/2008
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
Lesson
EXAMPLE
Solution
© 2008 Key Curriculum Press
htt ://davinci.ke
Pa e 4 of 10
Two segments arecon ruentif and only if they have equal measures, or lengths.
When drawing figures, you show congruent segments by making identical markings.
Themid ointsegment is the point on the segment that is the same distanceof a from both endpoints. The midpointbisectsthe segment, or divides the segment into two congruent segments.
Study the diagrams below. a.Name each midpoint and the segment it bisects. b.Name all the congruent segments. Use the congruence symbol to write your answers.
Look carefully at the markings and apply the midpoint definition. a.CF = FD, so is the midpoint ofKLCD; J , soKis the midpoint ofL. b.CF FD, HJ HL,andK KL. Even though andGappear to have the same length, you cannot assume they are congruent without the markings. The same is true for and .
LESSON 1.1
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
Building Blocks of Geometry
31
9/12/2008
Mathematical Models
RaBis the part ofBthat contains pointand all the points onBthat are on the same side of pointas point.Imagine cutting off all the points to the left of point.
In the figure above,YandBare two ways to name the same ray. Note thatB is not the same asA!
32
A ray begins at a point and extends infinitely in one direction. You need two letters to name a ray. The first letter is the endpoint of the ray, and the second letter is any other point that the ray asses through.
9/12/2008
Pa e 5 of 10
Lesson
In this lesson, you encountered many new geometry terms. In this investigation you will work as a group to identify models from the real world that represent these terms and to identify how they are represented in diagrams.
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
htt ://davinci.ke
Step 4
Identify examples of these terms in the hotograph at right.
Step 2
Step 1
CHAPTER 1 Introducing Geometry
Look around your classroom and identify examples of each of these terms: point, line, lane, line segment, congruent segments, midpoint of a segment, and ray.
Identify examples of these terms in the figure above. Explain in your own words what each of these terms means.
© 2008 Key Curriculum Press
Step 3
Lesson
EXERCISES
1.In the photos below identify the physical models that represent a point, segment, lane, collinear points, and coplanar points.
For Exercises 2 4, name each line in two different ways.
2.
3.
4.
Pa e 6 of 10
For Exercises 5 7, draw two points and label them. Then use a ruler to draw each line. Don’t forget to use arrowheads to show that the line extends indefinitely. withD(−3, 0) and 5.B6.KL7.D (0,−3)
For Exercises 8
8.
10, name each line segment.
9.
For Exercises 11 and 12, draw and label each line segment.
11.B
12.
with (0, 3) and (−2, 11)
10.
For Exercises 13 and 14, use your ruler to find the length of each line segment to the nearest tenth of a centimeter. Write your answer in the form.mAB =
13.
14.
For Exercises 15 each segment.
15.B=4.5 cm
© 2008 Key Curriculum Press
htt ://davinci.ke
17, use your ruler to draw each segment as accurately as you can. Label
16.CD=3 in.
17.F=24.8 cm
LESSON 1.1 Building Blocks of Geometry33
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
9/12/2008
Lesson
htt
34
18.Name each midpoint and the segment it bisects.
19.Draw two segments that have the same midpoint. Mark your drawing to show congruent segments.
20.Draw and mark a figure in which midpoint ofPQ.
is the midpoint ofST, SP = PT,and T is the
For Exercises 21 23, name the ray in two different ways.
21.
For Exercises 24
24.B
22.
26, draw and label each ray.
25.YX
27.Draw a plane containing four coplanar points collinear points, B,andD.
23.
26.N
, B, C,andD,with exactly three
28.Given two pointsand,there is only one segment that you can name:B. With three collinear points, B,andC,there are three different segments that you can name:B, AC,andC.With five collinear points, B, C, D,and,how many different segments can you name?
For Exercises 29 31, draw axes on graph paper and locate ointA(4, 0) as shown.
29.DrawBwhere pointhas coordinates (2,−6). 30.DrawOMwith endpoint (0, 0) that goes through pointM(2, 2).
31.DrawCDthrough pointsC(−2, 1) andD(−2,−3).
Caree
Woodworkers use a tool called a lane to shave a rough wooden surface to create a perfectly smooth lanar surface. The smooth board can then be made into a tabletop, a door, or a cabinet. Woodworking is a very precise rocess. Producing high-quality ieces requires an understanding o lines, planes, and angles as well as careful measurements.
CHAPTER 1 Introducing Geometry
://davinci.ke
ress.com/Ke
PressPortalV2.0/Viewer/Lesson.htm
Pa
e 7 of 10
© 2008 Key Curriculum Press
9/12/2008
Lesson
htt
32.(If the signs of the coordinates of collinear points −6,−2),Q(−5, 2), and (−4, 6) are reversed, are the three new points still collinear? Draw a picture an explain why.
33.Draw a segment with midpoint
(−3, 2). Label itPQ.
34.Copy triangleTRYshown at right. Use your ruler to find the midpointof sideTRand the midpointGof sideTY.Draw
G.
35.Use your ruler to draw a triangle with side lengths 8 cm and 11 cm. Explain your method. Can you draw a second triangle with these two side lengths that looks different from the first?
SPIRAL DESIGNS T he circle design shown below is used in a variety of cultures to create mosaic decorations. The spiral design may have been inspired by patterns in nature. otice that the seeds on the sunflower also spiral out from the center. Create and decorate your own spiral design. Here are the steps to make the spirals. The more circles and radii you draw, the more detailed your design will be.
A completed spiral. Coloring or decorations that make the spiral stand out.
For help, see theGeometr Ex D namic lorationSpiral Designs at
© 2008 Key Curriculum Press
://davinci.ke
ress.com/Ke
www.ke math.com/DG
Pa
e 8 of 10
ke math.com/DG
LESSON 1.1 Building Blocks of Geometry35
PressPortalV2.0/Viewer/Lesson.htm
9/12/2008
Lesson
htt
36
CHAPTER 1
://davinci.ke
Midpoint
Afrom bothmidpoint distance is the point on a line segment that is the same endpoints.
Pa
You can think of a midpoint as being halfway between two locations. You know how to mark a midpoint. But when the position and location matter, such as in navigation and geography, you can use a coordinate grid and some algebra to find the exact location of the midpoint. You can calculate the coordinates of the midpoint of a segment on a coordinate grid using a formula.
If and are the coordinates of the endpoints of a segment, then the coordinates of the midpoint are
Histor
Surveyors and mapmakers of ancient Egypt, China, Greece, and Rome use various coordinate systems to locate points. Egyptians made extensive use o square grids and used the first known rectangular coordinates at Saqqara around 2650B.C.E. By the 17th century, the age of European exploration, the need for accurate maps and the development of easy-to-use algebraic symbols gave rise to modern coordinate geometry. Notice the lines of latitude an longitude in this 17th-century map.
Introducing Geometry
ress.com/Ke
PressPortalV2.0/Viewer/Lesson.htm
e 9 of 10
© 2008 Key Curriculum Press
9/12/2008
© 2008 Key Curriculum Press
USING YOUR ALGEBRA SKILLS 1 Midpoint
The midpoint is not on a grid intersection point, so we can use the coordinate midpoint property.
37
Pa e 10 of 10
9/12/2008
htt ://davinci.ke
Lesson
ress.com/Ke PressPortalV2.0/Viewer/Lesson.htm
The midpoint of
Bis (−2.5,−0.5).
SegmentBhas endpoints (−8, 5) and (3,−6). Find the coordinates of the midpoint ofB.
For Exercises 1 3, find the coordinates of the midpoint of the segment with each pair o endpoints.
8.In each figure below, imagine drawing the diagonals and .D a.Find the midpoint ofAthe midpoint of and Din each figure. b.What do you notice about the midpoints?
3.(14,−7) and (−3, 18)
4.One endpoint of a segment is (12,−8). The midpoint is (3, 18). Find the coordinates of the other endpoint.
5.A classmate tells you, “Finding the coordinates of a midpoint is easy. You just find the averages.” Is there any truth to it? Explain what you think your classmate means.
EXERCISES
Solution
6.Find the two points onABthat divide the segment into three congruent parts. Pointhas coordinates (0, 0) and pointhas coordinates (9, 6). Explain you method.
1.(12,−7) and (−6, 15)
EXAMPLE
7.Describe a way to find points that divide a segment into fourths.
2.(−17,−8) and (−1, 11)
